FOAMGUARD II
Doorway Sanitizer System

The Knight FoamGuard II doorway sanitizer is the right equipment to help reduce pathogens from spreading in food facilities. Blankets of sanitizing foam are effective barriers to microbes, but it is important to re-apply the blanket of foam before it's dissipated by traffic.

The Knight FoamGuard II doorway sanitizer sprays a blanket of sanitizing foam across a doorway or other path at pre-set intervals. Can vary the spray time and interval between sprays by day of the weeks and by up to three shifts per day.

• Two modular versions: durable foam tube or pump driven for low water pressure
• Adaptive programming allows flexible spraying and intervals
• Security devices prevent unauthorized tampering
• Foams through one, two, or three nozzles simultaneously
• Clean, sanitary design won't collect dirt

Standard Components
•  Wall-mounted unit - Consisting of a control module and a hydraulic module (pump or foam tube type), both mounted on a common back plate.
•  Single-chemical draw kit - Check valve, metering tip kit, 6 foot pickup tube, ceramic weight, and foot valve.
•  Two discharge manifolds - Foam nozzle mounted in an elbow attached to a 12 inch length of PVC pipe.

Optional Components
•  Second chemical draw kit - allows for a second chemical to be educted simultaneously. Useful for combining a non-foaming sanitizer with a foaming agent.
•  Alarm - Audible and visual, goes off five seconds before the system activates

Note: ¾" pipe or tubing (not supplied) is required to connect wall unit with discharge manifold(s). Do not exceed 40 ft from wall unit to farthest discharge manifold.

Get Brochure (Please wait while file opens)
Get Instruction Manual
Download Acrobat Reader 

Foam Tube Version

7659690