Search
 

DAIRY FARM PRODUCT PARTS LIST

 

 


Table of Contents

Electric and Air Operated Teat Dip Dispensers
SprayGuard Electric Diaphragm Teat Dip Pump
Teat Spray Wand

CleanGuard Pipeline/Milktank dispensers, pumps and accessories
CleanGuard electric diaphragm pump

Uniflow AODD Pump and Accessories
Uniflow AODD Pump

Liquidtrol Air Pump Timer Controls

FoamGuard Parlor Foamers
FoamGuard Mobile Parlor Foamer

FoamGuard Wall Mount Parlor Foamer

Footbath / Washpen Controller
Footbath / Washpen Controller

Dial-A-Chem Hose End Foamers
Dial-A-Chem

Automatic Laundry Detergent Dispenser
Automatic Laundry Detergent Dispenser

Metering Pumps
Pulsatron Pumps

 

DAIRY FARM PRODUCTS
Knight's lineup of value added pumps, electronics, and integrated pump controllers are designed to be easy to use and to provide years of efficient reliable service. Contact your regional Sales Manager for more information or customer service at the Knight location nearest you.
ELECTRIC AND AIR OPERATED TEAT DIP DISPENSERS          
The Spray Guard line of Air Operated and Low Voltage Electric pumps for dispensing Iodine and Chlorine Dioxide based teat dip chemicals
Spray Guard
 
Spray Guard Wand
Part No. Model Description
7640620-04 EDP-TD24 Spray Guard "EDP"  Low Voltage Electric Diaphragm Teat Dip Pump w/:
* Hinged #304 SS Case and Cover
* 1.6 Liter/Min Flow Rate
* Suction and Discharge fittings for 3/8" hose
* Wall Mount 110 VAC to 24 VAC power supply
Note: Anyone can install.
7659101 DC1WS Dairy Chem Teat Dip Dispenser in Plastic Case
* 3.0 GPM Polypro/Santoprene Pump
* Roto Mold Plastic Enclosure
* Regulator, Gauge, Filter, Bracket Assy.
* Kynar 1/2" Barb Fittings (Suction-Discharge)
* Push Connect Air Line Fitting
* Air Inlet Ball Valve
7659601 DCII-PT Two - 3 GPM AODD Pumps w/ Polypro Body and Santoprene Wetted Parts in stainless steel cabinet w/ pressure regulator/filter, pump selector valve and on-off air valve
7641267 TSW1 Teat Spray Wand w/ Variable Spray Nozzle and Fittings
Clean Guard PIPELINE/MILK TANK DISPENSERS, PUMPS AND ACCESSORIES      
The new Clean Guard line of modular pumps and digital controls delivers on performance and ease of use. Digital programming and "snap together" control/pump components make this chemical feed system extremely versatile and accurate. Available with an assortment of pump size and materials the Clean Guard can be cost effectively configured for any diary chemical feed application. 
Part No. Model Description
7140761 EDP - 100 Electric Diaphragm Pump Control Board (one per electric diaphragm pump required to add to base Unitech Unit). Includes PCB, and 4 conductor cable(10 ft.) to connect EDP pump
7164036 KP-8100XRD Control Guard Satellite Pump, Peristaltic, 36 Oz/Min, (24 VDC) "Right" w/ 3/8" barb x barb connectors and hose clamps
7164039 KP-5100XRD Control Guard Satellite Pump, 8 oz./min (24 VDC) “right” w/ ¼” Barb fittings
     
Clean Guard
 
7640621-01 EDP-770E Clean Guard "E" Electric Diaphragm Pump (1.5 GPM) w/ Stainless Steel Case, Power Switch, 70 PSI, Fittings w/ EPDM Valve Seals and Diaphragm
7640622-01 EDP-770V Clean Guard "E" Electric Diaphragm Pump (1.5 GPM) w/ Stainless Steel Case, Power Switch, 70 PSI, Fittings w/ Viton Valve Seals and Diaphragm
7640623-01 EDP-550E Clean Guard "E" Electric Diaphragm Pump (3.2GPM) w/ Stainless Steel Case, Power Switch, 70 PSI, Fittings w/ EPDM Valve Seals and Diaphragm
7640624-01 EDP-550V Clean Guard "E" Electric Diaphragm Pump (3.2 GPM) w/ Stainless Steel Case, Power Switch, 70 PSI, Fittings w/ Viton Valve Seals and Diaphragm
1600913 KAP-38KS * Uniflow 3/8" 6.8 GPM Kynar/Santoprene Pump w/ Kynar Fittings. No Mounting Bracket
1600978 KAP-38 * Uniflow 3/8" 6.8 GPM Polypro/Santoprene Pump w/ Kynar Fittings. No Mounting Bracket
7224255 Pump Mounting Bracket, Stainless Steel for KAP-38 w/Mounting Screws and Wall Mount Kit
7164042 3/8" Air Solenoid Valve for CG-200PL
7164033 Low Level Alarm Module, Unitech/Control Guard
7110127 Flow Switch 8.8,  with 10' of cable, 9" probe with float sensor
7110126 Flow Switch 18,  with 25' of cable, 18" probe with float sensor
7110129 Flow Switch 38,  with 25' of cable
CONTROL GUARD SPARE REPLACEMENT PARTS
Part No. Description
7140570-0 Circuit board, Control Guard w/display
7140762 Circuit board, Control Guard w/power supply connections
7164205 Face plate, solenoid
7655106-01 SIB -6, Unitech wall mounting plate, Control Guard
1600713 3/8" barb x 3/8" barb fitting, Kynar
7140761 Clean Guard control board
CLEAN GUARD / SPRAY GUARD REPLACEMENT PARTS
Part No. Description
7317323 Three chamber upper housing assembly
7317317 Five chamber pump upper housing assembly 
7317324 Three chamber lower housing assembly
7317320 Five chamber pump lower housing assembly
7317321 Three chamber valve housing assembly EPDM
7317322 Three chamber valve housing assembly Viton
7317326 Five chamber valve housing assembly EPDM
7317325 Five chamber valve housing assembly Viton
1600130-04 Spray Guard Pump, 24 VAC, Viton, 54 oz./min
1600131-01 Clean Guard Pump, 115 VAC, EPDM, 1.5 GPM
1600132-01 Clean Guard Pump, 115 VAC, Viton, 1.5 GPM
1600133-01 Clean Guard Pump, 115 VAC, EPDM, 3.2GPM
1600134-01 Clean Guard Pump, 115 VAC, Viton, 3.2GPM
1600131-02 Clean Guard Pump,230 VAC, Viton, 1.5 GPM
1600132-02 Clean Guard Pump,230 VAC, EPDM, 1.5 GPM
1600133-02 Clean Guard Pump,230 VAC, EPDM, 3.2GPM
1600134-02 Clean Guard Pump,230 VAC, Viton, 3.2GPM
1600800 Fitting, EPDM, Straight, 1/2" 
1600801 Fitting, Viton, Straight, 1/2"
1600802 Fitting, EPDM, ELL, 1/2"
1600803 Fitting, Viton, ELL, 1/2" 
1600804 Fitting, EPDM, Straight, 3/8"
1600805 Fitting, Viton, Straight, 3/8"
1600806 Fitting, EPDM, ELL, 3/8"
1600807 Fitting, Viton, ELL, 3/8"
Uniflow AODD Pumps and Accessories        
Uniflow Air Operated Double Diaphragm pumps are engineered to survive the most rigorous chemical dispensing applications and environments found in today's cleaning and sanitation markets. These pumps are proven performers with an extensive range of liquid end materials and seals for caustic solutions, acids, surfactants, enzymes, solvents, basic and complex oxidizers and more.
     
KAP-38    
The new Uniflow KAP-38 3/8” pumps condense a lot of pumping power into a compact, economical and reliable package. Small enough to fit in your hand, the KAP-38 can pump up to 7.0  gallons per minute. The KAP-38 features a patented Air Valve System and integrated spring loaded check valve system that prevents siphoning and holds prime. The KAP-38 also offers tremendous versatility. 
KAP-38
Part No. Description
1600978 KAP-38 3/8 AODD Pump, Polypro Body / Santoprene Wetted Parts
1900407 KAP-38 Polypro Body / Santoprene Wetted Parts, W/Plastic Mounting Bracket
1600913 KAP-38 3/8 AODD Pump, Kynar Body / Santoprene Wetted Parts
1600919 KAP-38 AODD Pump Poly PTFE w/ Fittings, Hose Clamps and Suction Screen
1900605 KAP-38 Kynar Body / Santoprene Wetted Parts, W/Plastic Mounting Brackett
1900601 KAP-38 Kynar Body / Santoprene Wetted Parts, W/Stainless Steel Mounting Brackett, W/Filter/Regulator  & 1/4" Nickel Plated Ball Valve
7600823 Repair Kit 3/8" Santoprene, Uniflow Wet End
7640629 KAP-38 Bracket Assembly 
7640630 Flow Guard AODD Pump Cabinet, Stainless Steel for 3/8" AODD Pumps w/ Mounting hardware 
KAP-50    
The Uniflow KAP-50 1/2” pumps feature an Air Valve System with Shoe Valve technology. Multiple suction/discharge ports that provide several liquid and plumbing options. Constructed of heavy duty plastic, the center section resists corrosion from even the most aggressive chemicals, while providing injection speed and uniform flow under the most rigorous environmental conditions.
Fast priming and the industry’s best life cycle performance will improve your chemical process with the lowest possible cost of ownership. The KAP-50 1/2” size pumps are for the jobs that require higher flow rates with accuracy and reliability.
 
 
KAP-50  
 
 
 
 
 
Part No. Description  
1600968 KAP-50 1/2 AODD Pump, Polypro Body / Santoprene Wetted Parts  
1900006 KAP-50 Poly Body / Santoprene Wetted Parts, W/Plastic Mounting Bracket  
1600945 KAP-50 1/2 AODD Pump, Polypro Body / PTFE Wetted Parts  
1900102 KAP-50 Polypro Body/PTFE Wetted Parts, W/Plastic Mounting Bracket  
1600979 KAP-50 1/2 AODD Pump, Kynar Pump Body / Santoprene Wetted Parts  
1900201 KAP-50 Kynar Pump Body / Santoprene Wetted Parts, W/Plastic Mounting Bracket  
1600986 KAP-50 1/2 AODD Pump, Kynar Body / PTFE Wetted Parts  
1900309 KAP-50 Kynar Pump Body / PTFE Wetted Parts, W/Plastic Mounting Bracket  
7600821 Repair Kit 1/2" PTFE, Uniflow Wet End  
7600822 Repair Kit 1/2" Santoprene, Uniflow Wet End  
7640631 Flow Guard AODD Pump Cabinet, Stainless Steel for 1/2" AODD Pumps w/ Mounting hardware  
AIR PUMP TIMER CONTROLS
Liquidtrol ATC-500
Model Part No. Description
ATC-500 7641075-07 Air Pump Control w/ Limit Timer, Air Solenoid,
Regulator, Filter, Gauge (115/208/230 VAC) 50/60 Hz
ATC-300 7641073-07 Air Pump Control w/ Programmable Event Timer, 
Air Solenoid, Regulator, Filter, Gauge 
(115/208/230 VAC) 50/60 Hz
ATC-200 7641072-07 Air Pump Control w/ Cycle Timer, Air Solenoid,
Regulator, Filter, Gauge (115/208/230 VAC) 50/60 Hz
     
AODD Pump Options  
(KAP-38 & KAP-50)  
Part No. Description  
0600508 Air Inlet Fittings, Air Inlet Ball Valve, Pressure Reg w/Drain, 3/8" Poly Airline
1600990-5 Air Operated Ball Valve 1/2" w/ EPDM Seals w/ 1/2" Barb Fittings and S.S. Mounting Bracket
1600990-7 Air Operated Ball Valve 1/2" w/ EPDM Seals w/ 3/4" Barb Fittings and S.S. Mounting Bracket
1600991-5 Air Operated Ball Valve 1/2" w/ Viton Seals w/ 1/2" Barb Fittings and S.S. Mounting Bracket
1600991-7 Air Operated Ball Valve 1/2" w/ Viton Seals w/ 3/4" Barb Fittings and S.S. Mounting Bracket
0200905 Bracket, Mounting Uniflow, w/Hardware
One Shot AODD Controls  
Part No. Description
0600503 Controller, Uniflow AODD, 24 VAC
0600505 Controller, Uniflow AODD, 24 VDC
0600507 Controller, Uniflow AODD, 115/208/230 VAC
FOAM GUARD PARLOR FOAMERS          
Foam Guard Mobile Parlor Foamer
Part No. Description
7649310 Mobile Parlor Foamer w/:
*Corrosion resistant, rugged plastic hand truck
* High output 7 GPM Air Operated Pump, PP/Santo
* Built -in air regulator and filter
* 25 ft. rubber foam hose, spray wand and on-off valve
* 15 Gallon Solution Tank
Foam Guard Wall Mount Parlor Foamer
7649305 Wall Mount Parlor Foamer
*Corrosion resistant, rugged plastic hand truck
* High output 7 GPM Air Operated Pump, PP/Santo
* Built -in air regulator and filter
* 25 ft. rubber foam hose, spray wand and on-off valve
* 15 Gallon Solution Tank
FOOTBATH/WASH PEN CONTROLLER          
Part No. Model Description
7640580 IPLC-K IPLC Multi Channel Footbath Process Controller w/:
* Stainless Steel Mounting Panel
* Power Supply for 110/240 to 24 VAC Operation
* Manual or Automatic Start Modes
* Programmable On-Off Repeat Cycle
* Activate 1-4 Control Outputs for water valves, pumps or drain valve in any sequence
* Easy Menu driven display 
DIAL-A-CHEM HOSE END FOAMERS          
Dial-A-Chem is designed to accurately dilute and dispense foaming detergents and sanitizers in meat rooms, food preparation areas, food processing operations, seafood shops, automotive care areas, shower stalls, or anywhere spray foam cleaning or sanitation is needed. Dial-A-Chem is  proportioning and foaming with the controls in the gun.
 A simple turn of the dial selector on the Dial-A-Chem delivers instant foam, sanitizer, or rinse at the end of the hose.
Part No. Description
7649395 Dial A Chem w/ 25 ft. Hose and Accy. Kit (U.S.)
7649396 Dial A Chem w/ 50 ft. Hose and Accy. Kit (U.S.)
7649397 Dial A Chem w/ 100 ft. Hose and Accy. Kit (U.S)
7649393 Accessory Kit ( (ceramic tube weight for 3/8 OD tube, brass hose adaptor (3/4" GHT), umbrella foot valve (viton), metering tip kit, hose clamp, mounting kit with screws and anchors, instructions, plastic anchors)
7649398 Dial A Chem w/ 7.6 Meter Hose and Accy. Kit (International)
7649399 Dial A Chem w/ 15.2 Meter Hose and Accy. Kit (International)
7649400 Dial A Chem w/ 30.4 Meter Hose and Accy. Kit (International)
7649394 Accessory Kit ( (ceramic tube weight for 3/8 OD tube, brass hose adaptor (1/2" BSP), umbrella foot valve (viton), metering tip kit, hose clamp, mounting kit with screws and anchors, instructions, plastic anchors)
7649390 Dial A Chem w/ 25 ft. Hose w/o Accy. Kit 
7649391 Dial A Chem w/ 50 ft. Hose w/p Accy. Kit 
7649392 Dial A Chem w/ 100 ft. Hose w/o Accy. Kit 
AUTOMATIC LAUNDRY DETERGENT DISPENSER          
OS-200L
Part No. Model Description
8600201-07 OS-100L One Shot Liquid Dispenser for Automatic Teat Rag Laundry Detergent Dispensing, One Pump
* Simple Integrated Pump Timer 
* Pump Delay Timer
* Internal 110/230 VAC Power Supply
* 8 oz/min Peristaltic Pump
* Accepts supply signals from 230 VAC to 24 VAC
8600604 OS-200L One Shot Liquid Dispenser for Automatic Teat Rag Laundry Detergent Dispensing, Two Pumps
* Simple Integrated Pump Timer 
* Pump Delay Timer
* Internal 110/230 VAC Power Supply
* 8 oz/min Peristaltic Pump
* Accepts supply signals from 230 VAC to 24 VAC
PICK UP TUBING ASSEMBLIES FOR 55 GALLON DRUMS
Part No. Description
7020227
1/2" x 38" Pickup Tube Assy. w/ 1/2" EPDM Check Valve and Kynar 1/2" Elbow Barb Fitting
7020226
1/2" x 38" Pickup Tube Assy. w/ 1/2" Viton Check Valve and Kynar 1/2" Elbow Barb Fitting
7020228
3/4" x 38" Pickup Tube Assy. w/ 3/4" EPDM Check Valve and Kynar 3/4" Elbow Barb Fitting
7020229
3/4" x 38" Pickup Tube Assy. w/ 3/4" Viton Check Valve and Kynar 3/4" Elbow Barb Fitting
ANTI SIPHON BALL VALVES
Part No. Description
1600990-5
Air Operated Ball Valve 1/2" w/ EPDM Seals w/ 1/2" Barb Fittings and S.S. Mounting Bracket
1600990-7
Air Operated Ball Valve 1/2" w/ EPDM Seals w/ 3/4" Barb Fittings and S.S. Mounting Bracket
1600991-5
Air Operated Ball Valve 1/2" w/ Viton Seals w/ 1/2" Barb Fittings and S.S. Mounting Bracket
1600991-7
Air Operated Ball Valve 1/2" w/ Viton Seals w/ 3/4" Barb Fittings and S.S. Mounting Bracket
METERING PUMPS ( Pulsafeeder) - CONTROLLERS
         
For high pressure pumping of cleaners and sanitizing agents into wash pens, hose drop systems, back flush and general purpose chem feed.
Part No. Model Description
7629900 Big Shot Hand Pump w/ .3 - 3 oz/min. range
Pulsatron Series E
8000103 LEH6SA-VTC3XXX Pulsatron Series E
5.0 GPH / 120 GPD (18.9 LPH) 100 PSI (110 VAC)
Manual Stroke Length and Frequency Adjustment w/ PVC Head and Fittings, PTFE seats, PTFE Diaphragm, Ceramic check balls, 3/8" I.D. x 1/2" O.D. Tubing, Bleed Valve, Foot Valve, and Injection Valve. 
Note: Replaces LMI-B131-460TI ( Wash Pen Injection)
8000149 LEH6SA-VTC1XXX Pulsatron Series E
5.0 GPH / 120 GPD (18.9 LPH) 100 PSI (110 VAC)
Manual Stroke Length and Frequency Adjustment w/ PVC Head and Fittings, PTFE seats, PTFE Diaphragm, Ceramic check balls, 1/4"I.D. x 3/8" O.D. Tubing, Bleed Valve, Foot Valve, and Injection Valve. 
Note: Replaces LMI-B131-75S (Hose Drop )
8000150 LE44S1-VTC1XXX Pulsatron Series E
1.85 GPH / 44 GPD (18.9 LPH) 100 PSI (110 VAC)
Manual Stroke Length and Frequency Adjustment w/ PVC Head and Fittings, PTFE seats, PTFE Diaphragm, Ceramic check balls, 1/4"I.D. x 3/8" O.D. Tubing, Bleed Valve, Foot Valve, and Injection Valve. 
8000117 FC-20003 Flow Controller 3/4" Pulsatron for Hose Drop w/:
* Sample Loop Plumbing assy
* Pump Power Output Pigtail
* Utility Power Pigtail
* Check System Button
8000118 FC-20003C Flow Controller 1" Pulsatron for Hose Drop w/: Same as above
* Sample Loop Plumbing assy
* Pump Power Output Pigtail
* Utility Power Pigtail
* Check System Button