MX Solution Center

A rugged wall-mounted system holding four concentrated bottles of chemical behind locked doors. The windows in the doors allow for sight of the product levels of each product concentrate taking the guesswork out of when to change the products. A dial-4 selector for both mop bucket fill and spray bottle fill. Built-in flow regulator makes dilutions accurate within a wide variety of water system pressures. The snap-out valve assembly makes tool-less service easy without the need to remove the cabinet from the wall. A.S.S.E. approved backflow preventors. Tubing and water connection hose comes pre-plumbed making the cabinet ready to hang right out of the box. Includes generic product identification labels.

View Product Sheet

Features

  • Simple, locking two door design for easy access and security.
  • Pre-plumbed with water and supply hoses for easy out-of-the box installation.
  • Large paddles to activate product with locking tabs for filling large buckets or large solution tanks of floor equipment.
  • Individual bucket fill and bottle fill hoses.
  • Easy-clean drip tray with drain tube connection.
  • Easy-read product selection knobs with defined “click” when turned to product choice.
  • Tool-less cover removal for easy service of internals.
MX Solution Center
Part No.
DESCRIPTION

6931000-F

MX Solution Center, Flex Gap

6931000-A

MX Solution Center, Aire Gap

OPTIONS -- MX Solution Center
MODEL #
DESCRIPTION

6400006

Metering Tip Wrench

7407117

Pressure regulator (brass, fixed 45 PSI)

7225032

Backsplash type drip tray w/ drain tubing & mounting kit

7225698-01

Joggle bracket, 7.5” (19 cm)

7225698-02

Joggle bracket, 11.5” (29 cm)

6306004

Nipple connector

0100506

1/2” barb connection for incoming water supply (Black Polypro fitting 1/2 barb x 3/4” MGHT)

2200106

1 GPM Venturi insert (white)

2200105

4 GPM Venturi insert (black)

Links

View manual

Click the button to view an online PDF of the product manual. You can then use your browser to download the PDF.